Elak C 10-96 Automotive Battery Charger

Elak C 10-96 Automotive Battery Charger Specification

Suitable For
Used for charging multiple batteries efficiently in automotive and industrial applications.

Power
10 Volt (v)

Capacity
34 Kg

Ambient Temperature
0-45C Celsius (oC)

Dimension (L*W*H)
58 X 30 X 51 cm Centimeter (cm)

Product Type
Other

Power Rating
240AC

Socket Type
3-pin plug

Input Voltage
96v Volt (V)

Output Voltage
12 to 96 V Ampere (A)

Usage
Other

Rated Frequency
50 Hz Hertz (HZ)

Voltage Range
12 to 96 V

Size
Standard

Usage & Applications
workshops, garages, battery service stations and retail outlets

Rated Voltage
10 Ampere (A)

Operating Temperature
15 - 35 Celsius (oC)

Cable Type

Weight
34 kg Kilograms (kg)

Warranty
1 YEAR

Phase
SINGLE

Display Type
METER

Frequency
50 Hertz (HZ)

Features
Max Current 10 Amps Output Voltage 12 - 96 V

Rated Current
10 Ampere (amp)

Conductor

Material
METAL BODY COPPER TRANSFORMER

Charger Type
Automotive Battery Charger

Enclosure
Ventilated metal body

Max Current
10 Amp

Cable Length
Long reach

Charging Modes
Manual/Auto

Maximum No Of Batteries
8 Batteries

Cooling System
Air cooled

Model Name/Number
C 10/96

Color
Red

Display Type
Analog Meter

Elak C 10-96 Automotive Battery Charger Trade Information

Minimum Order Quantity
1 Unit

Payment Terms
Cash in Advance (CID)

Supply Ability
100 Units Per Month

Delivery Time
2 Days

Main Domestic Market
All India

About Elak C 10-96 Automotive Battery Charger

ELAK Multi-Battery Chargers are designed for use in workshops, garages, battery service stations and retail outlets, where there is a requirement for charging a number of batteries simultaneously.

The Multi-battery chargers are available in 10 different models to charge from 2 to 12 batteries, in series. Models are available from 6 Amps to 20 Amps.

These chargers are also known as 'taper chargers' since charging current reduces gradually, as the battery gets charged. However they will not shut-off automatically. A voltmeter or hydrometer is required to check the battery condition periodically and switch off the charger, once the batteries are fully charged.

Technical Info

All the models operate on single phase 230V 50 Hz. A.C. Mains Supply.

The chargers are fitted with double wound mains isolated transformer using copper wire. Rectification is done means of a full wave bridge rectifier.

Charge current and voltage control is effected by means of coarse and fine tapping switches from the mains transformer. Protection for the charger is provided by means of circuit breakers on the A.C. and D.C. side.

These chargers are built in aesthetically designed thick sheet metal cabinets.